Fujitsu 6000NS Operator's Guide - Page 371
Ping Target Server Name has not been, Ping Target IP Address has not been
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Screen Ping Network Status System Status Usage Status Message Action Ping Target IP Address has not been entered. Enter a ping target IP address. Ping Target IP Address is incomplete. Complete the ping target IP address. Ping Target Server Name contains invalid characters. Enter a valid ping target server name. Ping Target Server Name has not been Enter a ping target server name. entered. Ping Target Server IP address is invalid. Enter a valid ping target IP address. Network cable must be connected. Connect the network cable. Cannot read data from a scanner unit. If the scanner does not restart automatically, disconnect the AC cable from the scanner to turn the power off, wait for at least ten seconds, then reconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Do you wish to clear the pad assembly usage counter? To clear the pad assembly usage counter, press the [OK] button. Otherwise, press the [Cancel] button. Do you wish to clear the pick roller usage counter? To clear the pick roller usage counter, press the [OK] button. Otherwise, press the [Cancel] button. Cannot read data from a scanner unit. If the scanner does not restart automatically, disconnect the AC cable from the scanner to turn the power off, wait for at least ten seconds, then reconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. C Network Scanner fi-6000NS Operator's Guide 343