Fujitsu 6000NS Operator's Guide - Page 74
Repeat until the test screen appears, with the following Calibration dialog box
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4. Touch the "+" with your fingertip. After being touched, the "+" will move to the next calibration position. Each time it stops, touch it again. The keyboard may also be used on the calibration screen: HINT • Press the [Home] key to jump straight to the post-calibration test screen. • Use the arrow keys to move the "+" to a different calibration point. This allows a bad touch to be redone. • Press the [Esc] key to stop the calibration process and return to the "Screen Calibration" screen. • Press the [Enter] key to close the error dialog. (Not normally needed.) Repeat until the test screen appears, with the following "Calibration" dialog box: 46
46
4.
Touch the "+" with your fingertip.
Repeat until the test screen appears, with the following "Calibration" dialog box:
HINT
The keyboard may also be used on the calibration screen:
•
Press the [Home] key to jump straight to the post-calibration test
screen.
•
Use the arrow keys to move the "+" to a different calibration point.
This allows a bad touch to be redone.
•
Press the [Esc] key to stop the calibration process and return to the
"Screen Calibration" screen.
•
Press the [Enter] key to close the error dialog. (Not normally needed.)
After being touched, the "
+
" will move to the next calibration posi-
tion. Each time it stops, touch it again.