Fujitsu 6000NS Operator's Guide - Page 385
Roller Clean, the [OK] button.
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 385 highlights
Screen Scanning Roller Cleaning Main Menu Shutdown Message Action Scanner hardware failure. The administrator should contact the FUJITSU scanner dealer or an authorized FUJITSU scanner service provider for help. If the scanner does not restart automatically, try turning the power off for ten seconds, and back on again. If the problem persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. When the file format is [MTIFF], the maximum file size for the total scanned data is 2GB. If the size of the scanned data exceeds 2GB, no MTIFF files can be created. Try the following: • Delete scanned pages from Scan Viewer until the total file size of the scanned data is less than 2GB. • Increase the compression level and try scanning again. Scanner top cover is closed. Open the cover and try again. Open the top cover to clean the feed rollers, and try again. For details, refer to "5.2.1 Cleaning the ADF" (page 266). Press the [c] key to rotate the rollers. Once roller cleaning has been completed, press the [OK] button. Clean the rollers, and then press the [OK] button. Maximum number (10) of Scan&Buffer jobs already queued, please wait... A maximum of ten jobs may be buffered. The scanner is busy. Please wait. OK to logout now? To logout, press the [OK] button. Otherwise press the [Cancel] button. OK to shutdown now? To shutdown the scanner, press the [OK] button. Otherwise, press the [Cancel] button. Shutdown will occur after all job finish. Please wait... Operations cannot be carried out while the scanner is shutting down. The scanner will shutdown automatically. Please wait. C Network Scanner fi-6000NS Operator's Guide 357