Fujitsu 6000NS Operator's Guide - Page 75
Using the System Settings Menus, Trace a line on the screen with your fingertip.
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3.5 Using the System Settings Menus 5. Trace a line on the screen with your fingertip. ⇒ A corresponding line will appear on-screen. If the line does not appear correctly, press the [Calib screen] button to return to Step 4. If the screen becomes cluttered, press the [CLR screen] button to remove all the lines. Press the [Cursor on/off] button to toggle the mouse cursor between HINT its "visible" and "hidden" states. 6. When you are satisfied with the touch screen response, press the [Update] button. ⇒ This saves the current calibration data, completing the calibration process, and returns you to the "Screen Calibration" screen. 3 ATTENTION If the calibration is not performed carefully, or the [Enter] key is pressed before all the calibration points have been touched, the following error message may appear: Parameter Error. Please input, again. Press the [Enter] key to dismiss the error dialog, and perform the calibration from Step 4 again, being careful to touch each calibration point accurately. Administrator Operations Network Scanner fi-6000NS Operator's Guide 47