Fujitsu 6000NS Operator's Guide - Page 320
Result, Connection, status, Action, change the [Link Speed
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
When checking the network connection status of a server with an FQDN, the following results are possible. Result "Ping statistics" shows "Lost=0 (0% loss)" "Ping request could not find host xxx.xxx.xxx. Please check the name and try again." "Ping statistics" shows "Lost=4 (100% loss)" "Ping statistics" shows "Lost=N (1 to 99% loss)" "Hardware error" Connection status OK None Action NG Check that the ping target server name is cor- rect. Check that the DNS server or WINS server settings are correct. If the ping target server name is correct, refer to "Failure to connect to a server by name" (page 300) for further solutions. NG Check that the ping target server name is cor- rect. In "3.6.12 Checking the Network Operating Status" (page 124), change the [Link Speed/ Duplex Mode] from "Auto-Negotiation" to a fixed mode. NG There may be a quality problem with the LAN cable. Replace the LAN cable and try again. In "3.6.12 Checking the Network Operating Status" (page 124), change the [Link Speed/ Duplex Mode] from "Auto-Negotiation" to a fixed mode. NG The LAN cable may have become discon- nected during the Ping test. Check the status of the LAN cable and try again. OK: Connection is operating normally. NG: Connection is faulty. 292