Fujitsu 6000NS Operator's Guide - Page 413
Setting the e-Mail Server SMTP, 6.3 Network Connection Troubleshoot
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
Code 12010006 12010100 12020001 12020002 Message Action SMTP server connection was lost while sending e-mail. Try the following: • Check that the LAN cable of the scanner and SMTP server is connected properly. • Contact a system administrator to check that then scanner IP address and SMTP server settings are correct. "6.3 Network Connection Troubleshooting" (page 290) • Contact a system administrator to check that the SMTP server is working properly. • Contact a system administrator to check the maximum e-mail size allowed by the SMTP server. Error: e-mail could not be sent. Contact a system administrator to check if sending e-mail is allowed. Scanned data size exceeded maximum size allowed for sending by fax. Try the following: • Reduce the number of pages to be scanned and send the fax in separate parts. • Select a higher compression level, and try again. "4.8.8 Compression" (page 241) If the problem persists, contact a system administrator to check the "Maximum Attachment Size" setting. "3.6.6 Setting the e-Mail Server (SMTP Server)" (page 83) Could not connect to server when sending fax. Try the following: • Check that the LAN cable of the scanner and SMTP server is connected properly. • Contact a system administrator to check that the scanner IP address, SMTP server and fax server settings are correct. "6.3 Network Connection Troubleshooting" (page 290) • Contact a system administrator to check that the SMTP and fax servers are working properly. C Network Scanner fi-6000NS Operator's Guide 385