Fujitsu 6000NS Operator's Guide - Page 80
Re-connect the LAN cable to the scanner., Reboot the scanner again.
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
• If the new scanner name is the same as another device name already in HINT use on the network, communication problems will occur. In this case, try the following steps: 1. Disconnect the LAN cable and turn the scanner off. 2. Reboot the scanner with the LAN cable disconnected, and enter a non-duplicate scanner name. 3. Reboot the scanner again. 4. Re-connect the LAN cable to the scanner. • The connection will be lost if the scanner name is changed via the network interface. To continue with other settings, wait a short time for the device to restart, then login to the network interface again. 52
52
HINT
•
If the new scanner name is the same as another device name already in
use on the network, communication problems will occur. In this case, try
the following steps:
1.
Disconnect the LAN cable and turn the scanner off.
2.
Reboot the scanner with the LAN cable disconnected, and enter a
non-duplicate scanner name.
3.
Reboot the scanner again.
4.
Re-connect the LAN cable to the scanner.
•
The connection will be lost if the scanner name is changed via the network
interface. To continue with other settings, wait a short time for the device to
restart, then login to the network interface again.