Fujitsu 6000NS Operator's Guide - Page 349
A.5.3 Detection by both Layer and Length, 4.8.13 Multifeed Detection Layer and Length
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
A.5.3 Detection by both Layer and Length If [Both] is selected in "4.8.13 Multifeed Detection (Layer and Length)" (page 250), mulifeeds are detected by both layer and length. In this case, set sheets of the same thickness and length in the ADF at any one time. • Document thickness: 0.065 to 0.15mm • Document length deviation: 1% or less • Punched holes are not allowed within 35mm (1.4in) of the vertical center line of the docu- ment. • Do not glue on any other paper within 35mm (1.4in) of the vertical centerline of the docu- ment. A ATTENTION • Multifeed detection by layer will often mis-detect very thick paper or plastic documents. When scanning such documents, select "None" on the "Multifeed Setup" screen. • Multifeed may not be detected for the top and bottom 25mm of a document. Area where multifeed detection is possible 35mm Front side Page top Feed direction Page bottom Center of paper Network Scanner fi-6000NS Operator's Guide 321