Fujitsu 6010N Operation Manual - Page 225

4.11 Setting Job Features Press the [Name Format] button to specify a file name on the "File Names HINT (Common)" screen. "Sub-folders" is enabled only when scanned data is saved to a folder. For details about setting values, refer to "4.6.9 Setting a File Name Format 4 for When Saving Scanned Data" (page 72). z Check the Scan Count When the number of sheets to be scanned for a job is fixed, set whether to check that the expected amount of sheets has been scanned. z If [Yes] is selected The number of scanned sheets is checked while a job is being processed. z For "Expected Count", enter the expected number of sheets to be scanned, between 1 and 999. ATTENTION z If a "Print" job item is included, the expected number of sheets to be scanned becomes 1 to 100. z For "Print", up to 100 pages can be scanned. For other than "Print", up to 999 pages can be scanned. For duplex scanning, make sure to set the number of pages so as not to exceed these respective maximums. z Select the [Allow per-Job adjustment] checkbox to make it possible to change the expected count of sheets to be scanned on the "Scan Count" screen, according to each job. z Select the [Confirm the Scan Count] checkbox to have the actual and expected sheet counts displayed on the "Scan Count" screen after scanning is complete. z If [No] is selected The number of scanned sheets is not checked while a job is being processed. fi-6010N Network Scanner Operator's Guide 187