Fujitsu 6010N Operation Manual - Page 500
If using DHCP, on the Network Status, 4.7.18 Checking the, Network Operating Status
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 500 highlights
No. Problem Action 3 When using DHCP, the DHCP server does If using DHCP, on the "Network Status" not operate normally, or there is a problem screen, check that IP address, subnet with the DHCP server settings. mask, and default gateway settings are all correct. If these settings are not correct, the DHCP server may not operate normally, or the DHCP server may not assign valid IP addresses because of restricted number of leases or MAC address validation. Check the DHCP server connection status and the details of the server settings. For more details about the "Network Sta- tus" screen, refer to "4.7.18 Checking the Network Operating Status" (page 152). 4 Another host or communication device is If the same IP address has already been connected using the same IP address as used by another host or communication the scanner. device, then even if the other device has been given a different IP address the server may not recognize the scanner's "duplicate" IP address until it is rebooted. Restart the server. If a duplicate IP address connection from another host or communication device exists on a LAN, both it will be unusable. If a duplicate IP address connection from another host or communication device exists, pull out its LAN cable and restart the server. 5 Access is denied due to the establishment If a firewall has been established between of a firewall between the server and the the server and the scanner, check that it scanner. has not been set to deny access to the net- work. 462