Fujitsu 6010N Operation Manual - Page 289
Software Update Time-Period Restrictions, iScanner Shared Folder Service Port Number
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
5.6 Setting the Central Admin Server z iScanner Shared Folder Service Port Number Enter the port number to be used by the iScanner Shared Folder Service. The default value is the port number which was specified at the time of installation (the default value at installation is 30444). The value can be specified within the range of 1024 to 65535. ATTENTION When Central Admin Server software is installed in the Windows 2000 Server, "SharePoint Server Connection Settings" cannot be set. When no SharePoint folders are used, stopping the iScanner Shared HINT Folder Service causes no problems. ■ Software Update Time-Period Restrictions Set whether to automatically update the scanner system, security, installed options, and Add-ins using the Central Admin Server. z Always allow Always allow updates. 5 z Never allow Never allow updates. z Only allow in the following time period Only allow updates within a restricted time period. Set the restricted time period with the [Start] and [End] fields. z When an update is available for both systems (security and installed options HINT included) and Add-ins, if the update of systems is completed outside the speci- fied time-period, update is not run for Add-ins. z The length of time required for a software update can be estimated as follows: Update module size × No. of target scanners × 1.5 Network throughput Example: the following update case should be estimated as: 15 × 40 ×1.5 = 900 seconds (15 minutes) 1 z Update module size: 15 MB z Number of scanners: 40 z Network throughput: 8 Mbps = 1 MB/s fi-6010N Network Scanner Operator's Guide 251