Garmin GPSMAP 2206 GPSMAP 2206/2210 Owner's Manual - Page 84
Using the Sonar Adjustment Menu, Color Gain, Whiteline, ROCKER
UPC - 753759053024
View all Garmin GPSMAP 2206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
USING SONAR > SONAR PAGE Using the Sonar Adjustment Menu Use the Sonar adjustment menu to access the settings and features most commonly used on the Sonar Page. To select an adjustment option from the Sonar Page: 1. Press ADJ to open the Sonar adjustment menu. 2. Press up or down on the ROCKER to highlight the option you want to change, and press ENTER. 3. Use the soft keys to make adjustments. 4. To exit any of the adjustment options, press the Back soft key, or press QUIT. To change a Sonar adjustment menu setting: 1. Select an adjustment menu option using the method described previously. 2. Press up or down on the ROCKER to change the setting, range, or percentage (Off, 1-100%). 3. Press ENTER to accept the change, or QUIT to close the Sonar adjustment menu. The Sonar adjustment menu contains the following options: • Gain-controls the sensitivity of the sonar receiver. Auto (default) is the recommended setting. It automatically sets the sonar sensitivity. You can also set the gain manually. To see more detail on the screen, increase the receiver sensitivity by selecting a higher gain. If there is too much detail or if the screen is cluttered, lower the sensitivity (lower the gain) to increase the clarity of the screen. If Frequency is set to Dual, you can set the Gain separately for each frequency (50 kHz and 200 kHz). • Color Gain-controls what colors are applied to the objects on the screen. Auto (default) is the recommended setting. It automatically sets the colors, based on your Auto Color Gain setting. You can also set the Color Gain manually. If Frequency is set to Dual, you can set the Color Gain separately for each frequency (50 kHz and 200 kHz). • Whiteline-controls how the unit shows information about the bottom type (hard or soft). With the Whiteline Off, the bottom return shows as red and contains no information on bottom hardness. With Whiteline set at Normal or 1-100%, the bottom return becomes white with a red line, in the default color scheme, indicating where the water meets the bottom. To turn the Whiteline Off, press the ROCKER down until the setting bar is all the way at the bottom of the range and reads Off. 76 GPSMAP 2206/2210 Owner's Manual