Hayward HLPRO4 OmniPL-Automation-Operation-Manual-092786RevD - Page 11

Set Pump Speed Refer to the screen below to select the pump speed during the schedule. If custom is selected, you'll be asked to set the % pump speed or RPM depending on the setting. When finished, touch the Save button to save the schedule. NOTE: the speed setting only appears if the pump is a vari- able speed or a two speed pump. low med high custom POOL vsp pump start / end repeat speed 01 10:00 am / 7:00 pm med all week ON POOL vsp pump After saving, you'll be brought back to the pump schedule screen. The new schedule will be displayed. NOTE: if you intend to run the pump at different speeds throughout the day, create additional schedules. You can start a new schedule on the same minute that the previous one ends. If schedules overlap, the newest schedule's start time will take priority by ending the previous schedule early. You can create up to 100 total schedules on the system. Edit a Schedule To edit a schedule, touch the schedule as shown below. You'll be brought back to the screen which will allow you to set times, speed and frequency. 01 10:00 am / 7:00 pm med all week ON POOL vsp pump start 10:00 am end 7:00 pm 10 : 00 am pm start / end repeat speed POOL vsp pump 10 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS