Hayward HLPRO4 OmniPL-Automation-Operation-Manual-092786RevD - Page 20

Turn on / Turn off - Slide this switch to manually turn on/off the ColorLogic lights. This will override schedules or timer settings. Selections - Select the desired light show or solid color. 1 / 2 ON VoodooLounge Tranquility USA ColorLogic Lights Control Screen Twilight Gemstone Mardi Gras UCL color shows Synchronize - Touch this button to synchronize the ColorLogic lights. The lights will then default to Voodoo Lounge. Set Schedule Touch this button to set a schedule for the ColorLogic lights. Countdown Timer Touch this button to set a countdown timer for the lights. Light Show / Color This button will change the selection between light shows ( ) and solid colors ( ). OmniPL Direct Mode (Universal ColorLogic Lights built after June 2018) Universal ColorLogic lights built after June 2018 are capable of OmniPL Direct mode. To run in this mode, select OmniPL Direct mode when configuring your lights in the Configuration Wizard (see Installation Manual). The OmniPL will test your lights during configuration to confirm that they support OmniPL Direct mode. If so, the ColorLogic Control Screen will display a Settings icon rather than a Synchronize button, which allows both Speed and Brightness control shown on the diagram below. If a WaterBowl light is configured, the Flicker effect can also be activated from the Settings screen. Note that these settings will also be an option when setting up schedules and timers for lights running in OmniPL Direct mode. 1 / 2 ON Speed 1x ON VoodooLounge Tranquility USA Brightness 100% Twilight Gemstone Mardi Gras Lights color shows Flicker E ect OFF LIGHTS settings Other Lights You can turn other lights on/off, set schedules, and set a countdown timer at the Other Lights Control Screen shown below. These functions have been illustrated previously in this manual. 1 / 2 ON vsp jets deck lights pH ON heat/cool cleaner POOL features uclights chlorinator POOL deck lights 19 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS