Hayward HLPRO4 OmniPL-Automation-Operation-Manual-092786RevD - Page 22

Schedule The Schedule button appears on the Features Screen regardless of what equipment has been configured in the Configuration Wizard. It offers a convenient way to create and edit schedules. Any equipment that has been configured and has an option for schedules, will be shown in the Schedule Control Screen. Equipment that has been assigned a schedule will show a clock symbol in the upper right side of the button. Touching any of these buttons will bring you to the schedule screen for that equipment. Create and edit schedules as shown on page 9. 2 / 2 music schedule vsp uclights spillover POOL features heat/cool cleaner POOL schedule Spillover If spillover is configured, you can turn spillover on/off, set schedules, and set a countdown timer at the Spillover Control Screen. These functions have been illustrated previously in this manual. 2 / 2 ON music schedule spillover POOL features ON LOW MED POOL vsp pump HIGH CUSTOM Freeze Protect Override If freeze protect is enabled AND the air temperature falls below the freeze threshold, the OmniPL will turn on the filter pump to circulate the water. Freeze protection can be overridden for 60 minutes by touching the Freeze Prot. button found on the Features Screen. IMPORTANT: Ensure that equipment is protected from a freeze condition before overriding this feature. To resume normal freeze protection, simply touch the Freeze Prot. button again. vsp uclights schedule heat/cool cleaner POOL features Overriding Freeze Protect could cause damage to your system. Are you sure? 60 min 120 min 180 min 21 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS