Hayward HLPRO4 OmniPL-Automation-Operation-Manual-092786RevD - Page 9

Filter Pump In the example below, a variable speed pump which was named "vsp" has been configured to be used with the Pool in the Configuration Wizard. Touching the "vsp" button in the Features Screen will bring you to a pump Control Screen which will let you manually turn on/off the pump, set a schedule, set a speed, apply a countdown timer and view the status. Single speed and two speed pumps will have a similar Control Screen. 1 / 2 ON vsp pH alarm light row heat/cool cleaner POOL features uclights chlorinator Pool Features Screen ON LOW MED HIGH CUSTOM POOL vsp pump Pump Control Screen Turn On / Turn Off - Slide this switch manually to turn on/off the pump. This will override any schedules or timer settings. Status of Equipment - This is an indicator only. When lit up and in motion (shown below), the equipment is active. When grayed out and stationary, the equipment is off. Change Speed - Manually select the desired speed. This will not be shown for single speed pumps. Low, Med, and High are fixed speeds. The Custom button will bring you to a screen that allows you to select a speed based on percentage or RPM (determined during configuration). ON ON LOW MED POOL vsp pump HIGH CUSTOM Set Schedule - Touch this button to add/delete a schedule for the filter pump or to enable/disable an existing schedule. Countdown Timer - Touch this button to set a countdown timer for the filter pump. Diagnostics - Touch this button to view the filter pump's diagnostics. This option only appears for variable speed pumps. 8 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS