Hayward HLPRO4 OmniPL-Automation-Operation-Manual-092786RevD - Page 5

Home Screen When the idle screen is touched, the OmniPL will display the Home Screen. This screen will give the user access to all functions, settings and configuration options. 82ºF 71º F air features lights daylight alarm Power Button The power button is displayed at all times when the OmniPL is not idle. When touched, it offers the following 4 functions: 82ºF 71º F air features lights daylight alarm service mode shut down features o simple mode Shut Down - When Shut Down is selected, the OmniPL will turn off all pool equipment and report when it is safe to remove power. When this message is displayed, you can either power off the unit or restart the OmniPL by touching the large power button displayed on the left side of the screen. Service Mode (page 33) - Service Mode will turn off all pool equipment and disable all remote controls including networked devices. Service Mode is useful to prevent scheduled operation and disable remote operation while servicing the pool. After selecting Service Mode, there are two options: Service Mode (Standard): The OmniPL will remain in Service Mode until you manually exit. To exit Service Mode, touch the power button and select the Service Mode button again. Service Mode Timed: Before entering Service Mode, you will select a Service Mode timeout. This is the amount of time that the OmniPL will stay in Service Mode before automatically exiting. The timeout can be set between 1-96 hours. There is no need to exit Service Mode manually. 4 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS