HP 6000 User Guide - Page 79
Solution 7: Clear the paper jam, Solution 9: Check the connection from the product to your computer
UPC - 884420680673
View all HP 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
From your computer, open the printer folder and see if the cancelled job remains in the print queue. Try to delete the job from the queue. If the print job remains in the queue, try one or both of the following: • Disconnect the USB cable from the product, restart the computer, and then reconnect the USB cable to the product. • Shut down the product, restart the computer, and then restart the product. Cause: A deleted print job was in the queue. If this did not solve the issue, try the next solution. Solution 7: Clear the paper jam Solution: Clear the paper jam and remove any torn paper that remains in the product. For more information, see: Clear jams Cause: The product had a paper jam. If this did not solve the issue, try the next solution. Solution 8: Make sure the print carriage can move freely Solution: Unplug the power cable if it is not already unplugged. Check to see if the print carriage will move freely from one side of the printer to the other. Do not try to force it to move if it is hung up on something. CAUTION: Be careful not to force the print carriage. If the carriage is stuck, forcing it to move will damage the printer. Cause: The print carriage had stalled. If this did not solve the issue, try the next solution. Solution 9: Check the connection from the product to your computer Solution: Check the connection from the product to your computer. Verify that the USB cable is securely plugged into the USB port on the back of the product. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn off the product and then on again. If the product is connected to the computer through a wired, wireless, make sure that the respective connections are active and the product is turned on. If the connections are secure, and nothing has printed several minutes after you sent a print job to the product, check the status of the product. In the HP Solution Center software, click Settings, and then click Status. Cause: The computer was not communicating with the product. Print troubleshooting 75