HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Configuration Gu - Page 188
To con an EBGP peer group by using Method 2 IPv4
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Step Command 5. Add a peer into the EBGP peer group. peer ipv6-address group group-name [ as-number as-number ] 6. (Optional.) Configure a peer group-name description description for a peer group. description-text 7. Create and enter BGP IPv6 unicast instance view or BGP-VPN IPv6 unicast instance view. ipv6-family [ unicast ] 8. Enable the router to exchange IPv6 unicast routing information with peers in the peer group-name enable specified peer group. Remarks By default, no peer exists in the peer group. The as-number as-number option, if used, must specify the same AS number as the peer group-name as-number as-number command. By default, no description is configured for the peer group. By default, the BGP IPv6 unicast instance view and BGP-VPN IPv6 unicast instance view are not created. By default, the router cannot exchange IPv6 unicast routing information with the peers. To configure an EBGP peer group by using Method 2 (IPv4): Step Command Remarks 1. Enter system view. 2. Enter BGP view or BGP-VPN instance view. system-view • Enter BGP view: bgp as-number • Enter BGP-VPN instance view: a. bgp as-number b. ip vpn-instance vpn-instance-name N/A N/A 3. Create an EBGP peer group. group group-name external By default, no EBGP peer group is created. 4. Create an IPv4 BGP peer and peer ip-address as-number specify its AS number. as-number By default, no IPv4 BGP peer is created. 5. Add the peer into the EBGP peer group. peer ip-address group group-name [ as-number as-number ] By default, no peer exists in the peer group. The as-number as-number option, if used, must specify the same AS number as the peer ip-address as-number as-number command. 6. (Optional.) Configure a peer group-name description description for a peer group. description-text By default, no description is configured for the peer group. 7. Create and enter BGP IPv4 unicast instance view or BGP-VPN IPv4 unicast instance view. ipv4-family [ unicast ] 8. Enable the router to exchange IPv4 unicast routing information with peers in the peer group-name enable specified peer group. By default, the BGP IPv4 unicast instance view and BGP-VPN IPv4 unicast instance view are not created. By default, the router cannot exchange IPv4 unicast routing information with the peers. 177