HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Configuration Gu - Page 283
On Host A, Telnet to Switch C that is directly connected to Switch A. The operation fails.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
system-view [SwitchA] acl number 3101 [SwitchA-acl-adv-3101] rule permit tcp [SwitchA-acl-adv-3101] quit # Configure Node 5 for policy aaa to forward TCP packets to next hop 1.1.2.2. [SwitchA] policy-based-route aaa permit node 5 [SwitchA-pbr-aaa-5] if-match acl 3101 [SwitchA-pbr-aaa-5] apply next-hop 1.1.2.2 [SwitchA-pbr-aaa-5] quit # Configure interface PBR by applying the policy aaa to VLAN-interface 11. [SwitchA] interface vlan-interface 11 [SwitchA-Vlan-interface11] ip address 10.110.0.10 255.255.255.0 [SwitchA-Vlan-interface11] ip policy-based-route aaa [SwitchA-Vlan-interface11] quit # Configure the IP addresses of VLAN-interface 10 and VLAN-interface 20. [SwitchA] interface vlan-interface 10 [SwitchA-Vlan-interface10] ip address 1.1.2.1 255.255.255.0 [SwitchA-Vlan-interface10] quit [SwitchA] interface vlan-interface 20 [SwitchA-Vlan-interface20] ip address 1.1.3.1 255.255.255.0 2. Configure Switch B: # Configure a static route to subnet 10.110.0.0/24. system-view [SwitchB] ip route-static 10.110.0.0 24 1.1.2.1 # Configure the IP address of VLAN-interface 10. [SwitchB] interface vlan-interface 10 [SwitchB-Vlan-interface10] ip address 1.1.2.2 255.255.255.0 3. Configure Switch C: # Configure a static route to subnet 10.110.0.0/24. system-view [SwitchC] ip route-static 10.110.0.0 24 1.1.3.1 # Configure the IP address of VLAN-interface 20. [SwitchC] interface vlan-interface 20 [SwitchC-Vlan-interface20] ip address 1.1.3.2 255.255.255.0 Verifying the configuration # Configure the IP address 10.110.0.20/24 for Host A, and specify its gateway address as 10.110.0.10. # On Host A, Telnet to Switch B that is directly connected to Switch A. The operation succeeds. # On Host A, Telnet to Switch C that is directly connected to Switch A. The operation fails. # Ping Switch C from Host A. The operation succeeds. Telnet uses TCP and ping uses ICMP. The preceding results show that all TCP packets arriving on VLAN-interface 11 of Switch A are forwarded to next hop 1.1.2.2, and other packets are forwarded through VLAN-interface 20. The interface PBR configuration is effective. 272