HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Configuration Gu - Page 280

A node that has no if-match clauses matches any packet. PBR and Track PBR can work with the Track feature to dynamically adapt the availability status of a node configured with an apply clause to the link status of a tracked next hop. When the track entry associated with the node changes to negative because the next hop is detected as being unavailable, the node cannot be used for forwarding. When the track entry changes to positive or NotReady because the next hop is detected as being available, the node can be used for forwarding. For more information about track-PBR collaboration, see High Availability Configuration Guide. PBR configuration task list Tasks at a glance (Required.) Configuring a policy: • Creating a node • Configuring match criteria for a node • Configuring actions for a node (Required.) Configuring PBR Configuring a policy Creating a node Step 1. Enter system view. 2. Create a node for a policy, and enter policy node view. Command Remarks system-view N/A policy-based-route policy-name By default, no policy node is [ deny | permit ] node node-number created. Configuring match criteria for a node Step 1. Enter system view. 2. Enter policy node view. 3. Configure an ACL match criterion. Command system-view policy-based-route policy-name [ deny | permit ] node node-number if-match acl acl-number Remarks N/A N/A By default, no ACL match criterion is configured. 269