HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Configuration Guide
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 1
HP 6125XLG Blade Switch MCE Configuration Guide Part number: 5998-3721 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 3
between an IPv6 MCE and a VPN site 28 Configuring routing between an IPv6 MCE and a PE 32 Displaying information about IPv6 MCE 35 IPv6 MCE configuration example 35 Support and other resources 42 Contacting HP 42 Subscription service 42 Related information 42 Documents 42 Websites 42 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 4
Configuration Guide. Overview MPLS L3VPN overview MPLS L3VPN is a PE-based L3VPN technology. It uses BGP to advertise VPN routes and uses MPLS to forward VPN packets over the service provider backbone. MPLS L3VPN provides flexible networking modes, excellent scalability, and convenient support - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 5
backbone, the ingress PE functions as the ingress Label Switching Router (LSR), the egress PE functions as the IP connectivity that does not rely on any service provider network. • The classification of a site routing rules of the corresponding site. If a user at a site belongs to multiple VPNs at - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 6
one of the following formats: • 16-bit AS number:32-bit user-defined number. For example, 100:1. • 32-bit IPv4 address:16-bit user-defined number. For example, 172.1.1.1:1. • 32-bit AS number:16-bit user-defined number, where the minimum value of the AS number is 65536. For example, 65536:1. MCE BGP - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 7
services. To meet these requirements, you can configure a CE for each VPN, which increases device expenses and maintenance costs. Or, you can configure route, the MCE determines the source of the route according to the number of the receiving interface, and adds it to the corresponding routing table. - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 8
an RD for the VPN instance. 4. (Optional.) Configure a description for the VPN instance. Command system-view ip vpn-instance vpn-instance-name route-distinguisher route-distinguisher description text Remarks N/A By default, no VPN instance is created. By default, no RD is specified for the VPN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 9
, no route target is configured for the VPN instance. 5. (Optional.) Configure the maximum number of routes for routing-table limit number the VPN instance. { warn-threshold | simply-alert } By default, the maximum route number is not configured. Setting the maximum number of routes for a VPN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 10
[ track track-entry-number ] } [ permanent ] [ preference preference-value ] [ tag tag-value ] [ description description-text ] 3. (Optional.) Configure the default preference for static routes. ip route-static default-preference default-preference-value Remarks N/A By default, no static route - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 11
Step 5. (Optional.) Configure the default cost value for the redistributed routes. Command default cost value Remarks If you do not specify a default cost value, the default cost value is 0. For more information about RIP, see Layer 3-IP Routing Configuration Guide. Configuring OSPF between an - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 12
routes from any other routing protocol. 7. (Optional.) Configure OSPF to redistribute the default route. default-route-advertise summary cost cost By default, OSPF does not redistribute the default route. This command redistributes the default route in a Type-3 LSA. The MCE advertises the - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 13
command, the command redistributes routes to the level-2 routing table by default. quit N/A interface interface-type interface-number N/A isis enable [ process-id ] By default, IS-IS is disabled. For more information about IS-IS, see Layer 3-IP Routing Configuration Guide. Configuring EBGP - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 14
filter advertised routes. 10. (Optional.) Configure a filtering policy to filter received routes. Command Remarks filter-policy { acl-number | prefix-list ip-prefix-name } export [ direct | isis process-id | ospf process-id | rip process-id | static ] By default, BGP does not filter advertised - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 15
protocol is redistributed into RIP. If you do not specify a default cost, the default cost is 0. For more information about RIP, see Layer 3-IP Routing Configuration Guide. Configuring OSPF between an MCE and a PE Step Command 1. Enter system view. system-view 2. Create an OSPF process for - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 16
route. This command redistributes the default route in a Type-3 LSA. The MCE advertises the default route to the PE. 9. (Optional.) Configure a filtering policy to filter the redistributed routes. 10. (Optional.) Configure the default parameters for redistributed routes. filter-policy { acl-number - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 17
For more information about IS-IS, see Layer 3-IP Routing Configuration Guide. Configuring EBGP between an MCE and a PE Step Command Remarks 1. Enter system view. 2. Enable BGP and enter BGP view. system-view bgp as-number N/A By default, BGP is not enabled. 3. Enter BGP-VPN instance view. ip - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 18
Command filter-policy { acl-number | prefix-list ip-prefix-name } import Remarks By default, BGP does not filter the received routes. For more information about BGP, see Layer 3-IP Routing Configuration Guide see Layer 3-IP Routing Command Reference. MCE configuration examples Using OSPF to - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 19
] quit # Create VLAN 10, add port Ten-GigabitEthernet 1/0/1 to VLAN 10, and create VLAN-interface 10. [MCE] vlan 10 [MCE-vlan10] port Ten-GigabitEthernet 1/0/1 [MCE-vlan10] quit [MCE] interface vlan-interface 10 # Bind VLAN-interface 10 with VPN instance vpn1, and configure an IP address for VLAN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 20
10.214.10.2/24 to the interface connected to MCE and 192.168.0.1/24 to the interface connected to VPN 1. Add ports to VLANs correctly. (Details not shown) # On VR 1, configure a default route with the next hop as 10.214.10.3. system-view [VR1] ip route-static 0.0.0.0 0.0.0.0 10.214.10.3 # On - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 21
address 10.214.20.2/24 to the interface connected to MCE and 192.168.10.1/24 to the interface connected to VPN 2. (Details not shown) # Configure OSPF process 2, and advertise subnets 192.168.10.0/24 and 10.214.20.0/24. system-view [VR2] ospf 2 [VR2-ospf-2] area 0 [VR2-ospf-2-area - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 22
In this way, routes from different VPNs are separated. 3. Configure routing between MCE and PE 1: # The MCE uses port Ten-GigabitEthernet 1/0/3 to connect to PE's port Ten-GigabitEthernet 1/0/1. Configure the two ports as trunk ports, and configure them to permit packets carrying VLAN tags 30 and 40 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 23
InLoop0 The output shows that the static route of VPN 1 has been redistributed to the OSPF routing table of PE 1. Use similar procedures to configure OSPF process 20 between MCE and PE 1, and redistribute VPN 2's routing information from OSPF process 20 into the OSPF routing table of MCE. (Details - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 24
has been redistributed into the VPN routing tables on PE 1. Using BGP to advertise VPN routes to the PE Network requirements As shown in Figure 5, configure the MCE to advertise the routes of VPNs 1 and 2 to PE 1, so that the sites of each VPN can communicate with each other over the - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 25
between the MCE and VPN sites: # Enable an OSPF process on the devices in the two VPNs, and advertise the subnets. (Details not shown) # Configure OSPF on the MCE, and bind OSPF process 10 with VPN instance vpn1 to learn the routes of VPN 1. system-view [MCE] ospf 10 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 26
OSPF. 3. Configure routing between the MCE and PE 1: # Configure the ports between the MCE and PE 1 as trunk ports. The configuration procedure is similar 100 [MCE-bgp] ip vpn-instance vpn1 [MCE-bgp-vpn1] peer 30.1.1.2 as-number 200 # In BGP VPN 1 IPv4 family view, activate the EBGP peer PE 1, - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 27
bgp 200 [PE1-bgp] ip vpn-instance vpn1 [PE1-bgp-vpn1] peer 30.1.1.1 as-number 100 [PE1-bgp-vpn1] ipv4-family [PE1-bgp-ipv4-vpn1] peer 30.1.1.1 enable [PE1 255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 # Perform similar configuration on the MCE and PE 1 for VPN 2. Redistribute the OSPF routes of - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 28
255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 The output shows that PE 1 has learned the private route of VPN 2 through BGP. Now, the MCE has redistributed the OSPF routes of the two VPN instances into the EBGP routing tables of PE 1. 25 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 29
an RD for the VPN instance. 4. (Optional.) Configure a description for the VPN instance. Command system-view ip vpn-instance vpn-instance-name route-distinguisher route-distinguisher description text Remarks N/A By default, no VPN instance is created. By default, no RD is specified for the VPN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 30
, no route target is configured for the VPN instance. 5. (Optional.) Configure the maximum number of routes for routing-table limit number the VPN instance. { warn-threshold | simply-alert } By default, the maximum route number is not configured. Setting the maximum number of routes for a VPN - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 31
VPNs. An IPv6 MCE supports binding an IPv6 static route with an IPv6 VPN instance, so that the IPv6 static routes of different IPv6 VPN instances can be isolated from each other. To configure IPv6 static routing between IPv6 MCE and VPN site: Step 1. Enter system view. Command system-view Remarks - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 32
, see Layer 3-IP Routing Configuration Guide. To configure RIPng between an MCE and a VPN site: Step Command Remarks 1. Enter system view interface-type interface-number N/A 7. Enable RIPng on the interface. ripng process-id enable By default, RIPng is disabled. Configuring OSPFv3 between an - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 33
IP Routing Configuration Guide. To configure IPv6 IS Command system-view isis [ process-id ] vpn-instance vpn-instance-name network-entity net ipv6 enable Remarks N/A Perform this configuration on the IPv6 MCE. On a VPN site, configure normal IPv6 IS-IS. By default, no NET is configured. By default - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 34
the command, redistributed routes are added to the level-2 routing table by default. N/A N/A By default, no IPv6 IS-IS process is enabled. Configuring EBGP | static ] By default, the IPv6 MCE does not filter the routes to be advertised. filter-policy { acl6-number | By default, the IPv6 MCE does - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 35
VPN. Command system-view bgp as-number peer ipv6-address as-number as-number ipv6-family [ unicast ] peer ipv6-address enable import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ] Remarks N/A N/A By default, no BGP peer is configured. N/A By default, BGP cannot - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 36
for IPv6 static routes. ipv6 route-static default-preference default-preference-value Remarks If you do not specify a default preference value, the default preference value is 60. Configuring RIPng between an IPv6 MCE and a PE Step Command 1. Enter system view. system-view 2. Create a RIPng - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 37
specify the route level route-policy-name | tag tag ] * in the command, the command will redistribute routes to the level-2 routing table by default. 6. (Optional.) Configure a ipv6 filter-policy { acl6-number | filtering policy to filter prefix-list ipv6-prefix-name | the redistributed routes - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 38
. By default, BGP does not filter the received routes. NOTE: IPv6 BGP runs within a VPN in the same way as it runs within a public network. For more information about IPv6 BGP, see Layer 3-IP Routing Configuration Guide. Displaying information about IPv6 MCE Execute display commands in any - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 39
VR2, and the system name of PE 1 is PE1. 1. Configure the VPN instances on the MCE and PE 1: # On the MCE, configure VPN instances vpn1 and vpn2, and specify an RD and route ] quit # Create VLAN 10, add port Ten-GigabitEthernet 1/0/1 to VLAN 10, and create VLAN-interface 10. [MCE] vlan 10 [MCE-vlan10 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 40
address 2001:1::2/64 to the interface connected to the MCE and 2012:1::2/64 to the interface connected to VPN 1. Add ports to VLANs. (Details not shown.) # On VR 1, configure a default route, specifying the next hop as 2001:1::1. system-view [VR1] ipv6 route-static :: 0 2001:1::1 # On the MCE - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 41
assign IPv6 address 2002:1::2/64 to the interface connected to the MCE and 2012::2/64 to the interface connected to VPN 2. (Details not shown.) # Configure RIPng, and advertise subnets 2012::/64 and 2002:1::/64. system-view [VR2] ripng 20 [VR2-ripng-20] quit [VR2] interface vlan-interface - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 42
VPN 1 and VPN 2 in two routing tables. In this way, routes from different VPNs are separated. 3. Configure routing between the MCE and PE 1: # On the MCE, configure the port connected to PE 1 as a trunk port, and configure it to permit packets of VLAN 30 and VLAN 40 to pass with VLAN tags. [MCE - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 43
[PE1] interface vlan-interface 40 [PE1-Vlan-interface40] ip binding vpn-instance vpn2 [PE1-Vlan-interface40] ipv6 address 40::2 64 [PE1-Vlan-interface40] quit # Configure the IP address of the interface Loopback 0 as 101.101.10.1 for the MCE and as 100.100.10.1 for PE 1. Specify the loopback - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 44
Preference: 0 Interface : NULL0 Cost : 0 The output shows that PE 1 has learned the private route of VPN 1 through OSPFv3. Use similar procedures to configure OSPFv3 process 20 between the MCE and PE 1 and redistribute VPN 2's routes from RIPng process 20 into the OSPFv3 routing table of the - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 45
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 42 - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 46
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 47
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 48
3 B BGP BGP extended attributes (MPLS L3VPN), 3 using BGP to advertise VPN routes to PE (MCE), 21 C concept MPLS L3VPN, 2 configuring configuring VPN instance (IPv6 MCE), 26 configuring VPN instance (MCE), 4 EBGP between IPv6 MCE and PE, 34 EBGP between IPv6 MCE and VPN site, 31 EBGP between MCE and - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 49
technology MPLS L3VPN, 1 M MCE associating instance with interface, 5 configuring IPv6 MCE, 35 configuring MCE, 15 configuring, 1 configuring EBGP between MCE and PE, 14 configuring EBGP between MCE and VPN site, 10 configuring IS-IS between MCE and PE, 14 configuring IS-IS between MCE and VPN site - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 50
to PE (MCE), 15 VPN instance (MPLS L3VPN), 2 VPN-IPv4 address (MPLS L3VPN), 2 network management configuring IPv6 MCE, 26 configuring MCE, 1 MPLS L3VPN concept, 2 O OSPF configuring OSPF between MCE and PE, 12 configuring OSPF between MCE and VPN site, 8 using OSPF to advertise VPN routes to PE (MCE - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 51
MCE and VPN site, 28 configuring IS-IS between MCE and PE, 14 configuring IS-IS between MCE and VPN site, 9 configuring MCE, 15 configuring OSPF between MCE and PE, 12 configuring OSPF between MCE and VPN site, 8 configuring OSPFv3 between IPv6 MCE and PE, 33 configuring OSPFv3 between IPv6 MCE and - HP 6125XLG | R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 52
IS-IS between MCE and PE, 14 configuring IS-IS between MCE and VPN site, 9 configuring OSPF between MCE and PE, 12 configuring OSPF between MCE and VPN site, 8 configuring OSPFv3 between IPv6 MCE and PE, 33 configuring OSPFv3 between IPv6 MCE and VPN site, 29 configuring RIP between MCE and PE, 12
HP 6125XLG Blade Switch
MCE
Configuration Guide
Part number: 5998-3721
Software version: Release 2306
Document version: 6W100-20130912