HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 18
Displaying information about MCE, MCE configuration examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 9. (Optional.) Configure a filtering policy to filter the received routes. Command filter-policy { acl-number | prefix-list ip-prefix-name } import Remarks By default, BGP does not filter the received routes. For more information about BGP, see Layer 3-IP Routing Configuration Guide. Displaying information about MCE Execute display commands in any view. Task Command Display VPN instance information. display ip vpn-instance [ instance-name vpn-instance-name ] Display BGP peer group information for a VPN instance. display bgp group ipv4 vpn-instance vpn-instance-name [ group-name ] Display BGP peer information for a display bgp peer ipv4 vpn-instance vpn-instance-name [ group-name VPN instance. log-info | ip-address { log-info | verbose } | verbose ] For other MCE related displaying and maintaining commands, such as displaying routing table information for a VPN instance and maintaining routing sessions for a VPN instance, see Layer 3-IP Routing Command Reference. MCE configuration examples Using OSPF to advertise VPN routes to the PE Network requirements As shown in Figure 4, the MCE device is connected to VPN 1 through VLAN-interface 10 and to VPN 2 through VLAN-interface 20. OSPF runs in VPN 2. Configure the MCE device to separate routes from different VPNs and advertise the VPN routes to PE 1 through OSPF. 15