HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 36

Configuring RIPng between an IPv6 MCE and a PE, Configuring OSPFv3 between an IPv6 MCE and a PE

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Step Command 3. (Optional.) Configure the default precedence for IPv6 static routes. ipv6 route-static default-preference default-preference-value Remarks If you do not specify a default preference value, the default preference value is 60. Configuring RIPng between an IPv6 MCE and a PE Step Command 1. Enter system view. system-view 2. Create a RIPng process for an IPv6 VPN instance and ripng [ process-id ] vpn-instance enter RIPng view. vpn-instance-name 3. Redistribute the VPN routes. import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | route-policy route-policy-name ] * 4. (Optional.) Configure the default cost value for the redistributed routes. default cost value 5. Return to system view. quit 6. Enter interface view. interface interface-type interface-number 7. Enable the RIPng process on the interface. ripng process-id enable Remarks N/A N/A By default, no route of any other routing protocol is redistributed into RIPng. If you do not specify a default cost, the default cost is 0. N/A N/A By default, RIPng is disabled on an interface. For more information about RIPng, see Layer 3-IP Routing Configuration Guide. Configuring OSPFv3 between an IPv6 MCE and a PE Step 1. Enter system view. 2. Create an OSPFv3 process for an IPv6 VPN instance and enter OSPFv3 view. 3. Set the router ID. 4. Redistribute the VPN routes. 5. (Optional.) Configure a filtering policy to filter the redistributed routes. 6. Return to system view. 7. Enter interface view. Command system-view Remarks N/A ospfv3 [ process-id ] vpn-instance vpn-instance-name N/A router-id router-id N/A import-route protocol [ process-id | allow-ibgp ] [ cost value | route-policy route-policy-name | type type ] * By default, no route of any other routing protocol is redistributed into OSPFv3. filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ bgp4+ | direct | isisv6 process-id | ospfv3 process-id | ripng process-id | static ] By default, redistributed routes are not filtered. quit N/A interface interface-type interface-number N/A 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
33
Step
Command
Remarks
3.
(Optional.) Configure
the default precedence
for IPv6 static routes.
ipv6 route-static default-preference
default-preference-value
If you do not
specify a default
preference value,
the default
preference value is
60.
Configuring RIPng between an IPv6 MCE and a PE
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view.
ripng
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Redistribute the VPN
routes.
import-route
protocol
[
process-id
]
[
allow-ibgp
] [
cost
cost
|
route-policy
route-policy-name
] *
By default, no route of any
other routing protocol is
redistributed into RIPng.
4.
(Optional.) Configure the
default cost value for the
redistributed routes.
default cost
value
If you do not specify a default
cost, the default cost is 0.
5.
Return to system view.
quit
N/A
6.
Enter interface view.
interface
interface-type interface-number
N/A
7.
Enable the RIPng process
on the interface.
ripng
process-id
enable
By default, RIPng is disabled
on an interface.
For more information about RIPng, see
Layer 3—IP Routing Configuration Guide
.
Configuring OSPFv3 between an IPv6 MCE and a PE
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an OSPFv3
process for an IPv6 VPN
instance and enter
OSPFv3 view.
ospfv3
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Set the router ID.
router-id
router-id
N/A
4.
Redistribute the VPN
routes.
import-route
protocol
[
process-id
|
allow-ibgp
] [
cost
value
|
route-policy
route-policy-name
|
type
type
] *
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
5.
(Optional.) Configure a
filtering policy to filter the
redistributed routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
bgp4+
|
direct
|
isisv6
process-id
|
ospfv3
process-id
|
ripng
process-id
|
static
]
By default, redistributed routes
are not filtered.
6.
Return to system view.
quit
N/A
7.
Enter interface view.
interface
interface-type
interface-number
N/A