HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 19

Figure 4 Network diagram VPN 2 Site 1 PE 2 CE 1 PE 1 XGE1/0/1 Vlan-int30: 30.1.1.2/24 Vlan-int40: 40.1.1.2/24 VPN 1 192.168.0.0/24 VR 1 MCE XGE1/0/3 Vlan-int30: 30.1.1.1/24 XGE1/0/1 Vlan-int40: 40.1.1.1/24 Vlan-int10 XGE1/0/2 10.214.10.3/24 Vlan-int20 10.214.20.3/24 VR 2 VPN 2 192.168.10.0/24 PE 3 CE 2 VPN 1 Site 2 Configuration procedure Assume that the system name of the MCE device is MCE, the system names of the edge devices of VPN 1 and VPN 2 are VR1 and VR2, and the system name of PE 1 is PE1. 1. Configure the VPN instances on the MCE and PE 1: # On the MCE, configure VPN instances vpn1 and vpn2, and specify an RD and route targets for each VPN instance. system-view [MCE] ip vpn-instance vpn1 [MCE-vpn-instance-vpn1] route-distinguisher 10:1 [MCE-vpn-instance-vpn1] vpn-target 10:1 [MCE-vpn-instance-vpn1] quit [MCE] ip vpn-instance vpn2 [MCE-vpn-instance-vpn2] route-distinguisher 20:1 [MCE-vpn-instance-vpn2] vpn-target 20:1 [MCE-vpn-instance-vpn2] quit # Create VLAN 10, add port Ten-GigabitEthernet 1/0/1 to VLAN 10, and create VLAN-interface 10. [MCE] vlan 10 [MCE-vlan10] port Ten-GigabitEthernet 1/0/1 [MCE-vlan10] quit [MCE] interface vlan-interface 10 # Bind VLAN-interface 10 with VPN instance vpn1, and configure an IP address for VLAN-interface 10. 16