HP 6125XLG R2306-HP 6125XLG Blade Switch MCE Configuration Guide - Page 22
On the MCE, create VLAN 40 and VLAN-interface 40, bind the VLAN interface with VPN
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
The output shows that the MCE has learned the private routes of VPN 2. The MCE maintains the routes of VPN 1 and those of VPN 2 in two routing tables. In this way, routes from different VPNs are separated. 3. Configure routing between MCE and PE 1: # The MCE uses port Ten-GigabitEthernet 1/0/3 to connect to PE's port Ten-GigabitEthernet 1/0/1. Configure the two ports as trunk ports, and configure them to permit packets carrying VLAN tags 30 and 40 to pass. [MCE] interface Ten-GigabitEthernet 1/0/3 [MCE-Ten-GigabitEthernet1/0/3] port link-type trunk [MCE-Ten-GigabitEthernet1/0/3] port trunk permit vlan 30 40 [MCE-Ten-GigabitEthernet1/0/3] quit # Configure port Ten-GigabitEthernet 1/0/1 on the PE. [PE1] interface Ten-GigabitEthernet 1/0/1 [PE1-Ten-GigabitEthernet1/0/1] port link-type trunk [PE1-Ten-GigabitEthernet1/0/1] port trunk permit vlan 30 40 [PE1-Ten-GigabitEthernet1/0/1] quit # On the MCE, create VLAN 30 and VLAN-interface 30, bind the VLAN interface with VPN instance vpn1, and configure an IP address for the VLAN interface. [MCE] vlan 30 [MCE-vlan30] quit [MCE] interface vlan-interface 30 [MCE-Vlan-interface30] ip binding vpn-instance vpn1 [MCE-Vlan-interface30] ip address 30.1.1.1 24 [MCE-Vlan-interface30] quit # On the MCE, create VLAN 40 and VLAN-interface 40, bind the VLAN interface with VPN instance vpn2, and configure an IP address for the VLAN interface. [MCE] vlan 40 [MCE-vlan40] quit [MCE] interface vlan-interface 40 [MCE-Vlan-interface40] ip binding vpn-instance vpn2 [MCE-Vlan-interface40] ip address 40.1.1.1 24 [MCE-Vlan-interface40] quit # On PE 1, create VLAN 30 and VLAN-interface 30, bind the VLAN interface with VPN instance vpn1, and configure an IP address for the VLAN interface. [PE1] vlan 30 [PE1-vlan30] quit [PE1] interface vlan-interface 30 [PE1-Vlan-interface30] ip binding vpn-instance vpn1 [PE1-Vlan-interface30] ip address 30.1.1.2 24 [PE1-Vlan-interface30] quit # On PE 1, create VLAN 40 and VLAN-interface 40, bind the VLAN interface with VPN instance vpn2, and configure an IP address for the VLAN interface. [PE1] vlan 40 [PE1-vlan40] quit [PE1] interface vlan-interface 40 [PE1-Vlan-interface40] ip binding vpn-instance vpn2 [PE1-Vlan-interface40] ip address 40.1.1.2 24 19