HP 6531s HP Compaq 6530s, 6531s and 6535s Notebook PCs - Maintenance and Servi - Page 56
from the hard drive bay., Remove the hard drive
View all HP 6531s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Lift the right side of the hard drive bay cover (2), swing it to the left, and remove the cover (3). The hard drive bay cover is included in the Plastics Kit, spare part numbers 493175-001 (for use only with HP Compaq 6535s Notebook PC models) and 491253-001 (for use only with HP Compaq 6530s and 6531s Notebook PC models). 4. Loosen the Phillips PM2.5×10.0 captive screw (1) that secures the hard drive to the computer. 5. Grasp the Mylar tab (2) on the hard drive and slide the hard drive to the left to disconnect it from the system board. 6. Remove the hard drive (3) from the hard drive bay. 7. If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive bracket screws (1) from each side of the hard drive. 48 Chapter 4 Removal and replacement procedures