HP 6531s HP Compaq 6530s, 6531s and 6535s Notebook PCs - Maintenance and Servi - Page 64
Remove the two Phillips PM2.0×3.0 screws, that secure the optical drive bracket to the optical
View all HP 6531s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Remove the optical drive (3) from the computer. 5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7. Remove the optical drive bracket (2). Reverse this procedure to reassemble and install an optical drive. 56 Chapter 4 Removal and replacement procedures
4.
Remove the optical drive
(3)
from the computer.
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward
you.
6.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket
(2)
.
Reverse this procedure to reassemble and install an optical drive.
56
Chapter 4
Removal and replacement procedures