HP 6531s HP Compaq 6530s, 6531s and 6535s Notebook PCs - Maintenance and Servi - Page 80
USB connector module, system board.
View all HP 6531s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
USB connector module 1. Disconnect the USB cable from the system board (1). 2. Lift up the USB connector and remove the cable from the front edge of the base enclosure (2). 3. Remove the long Phillips PM2.5×9.0 screw (3) and the short Torx T8M2.5×4.0 screw (4) from the system board. 4. Remove the USB connector module (5). Reverse this procedure to install the USB connector module. 72 Chapter 4 Removal and replacement procedures
USB connector module
1.
Disconnect the USB cable from the system board
(1)
.
2.
Lift up the USB connector and remove the cable from the front edge of the base enclosure
(2)
.
3.
Remove the long Phillips PM2.5×9.0 screw
(3)
and the short Torx T8M2.5×4.0 screw
(4)
from the
system board.
4.
Remove the USB connector module
(5)
.
Reverse this procedure to install the USB connector module.
72
Chapter 4
Removal and replacement procedures