HP 6531s HP Compaq 6530s, 6531s and 6535s Notebook PCs - Maintenance and Servi - Page 93
through 9 for removing the heat sink on HP Compaq 6535s Notebook PC models.
View all HP 6531s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
3. Remove the heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1) and (2), and the system board components (3) and (4) each time the heat sink is removed. Replacement thermal material is included with all heat sink, system board, and processor spare part kits. NOTE: Steps 4 through 6 apply only to HP Compaq 6530s Notebook PC models. See steps 1 through 3 for removing the heat sink on HP Compaq 6531s Notebook PC models. See steps 7 through 9 for removing the heat sink on HP Compaq 6535s Notebook PC models. 4. Turn the system board upside down, with the audio connectors toward you. 5. Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the six screws (1) around the processor. Component replacement procedures 85