HP 9000 Superdome SX2000 HP Installation Guide, HP Integrity Superdome/sx2000 - Page 21

Blower 0 Blower 1, Installing the Front Blower Housing,

Get HP 9000 Superdome SX2000 PDF manuals and user guides View all HP 9000 Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

4. Using the handles on the housing labeled Blower 0 Blower 1, align the edge of the housing over the edge at the top front of the cabinet, and slide it into place until the connectors at the back of each housing are fully mated (Figure 15). Then tighten the thumbscrews at the front of the housing. Figure 15 Installing the Front Blower Housing 5. Unpack each of the four blowers. 6. Insert each of the four blowers into place in the blower housings with the thumbscrews at the bottom (Figure 16). Setting Up the System 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
4.
Using the handles on the housing labeled
Blower 0 Blower 1
, align the edge of the housing
over the edge at the top front of the cabinet, and slide it into place until the connectors at the
back of each housing are fully mated (
Figure 15
). Then tighten the thumbscrews at the front
of the housing.
Figure 15 Installing the Front Blower Housing
5.
Unpack each of the four blowers.
6.
Insert each of the four blowers into place in the blower housings with the thumbscrews at the
bottom (
Figure 16
).
Setting Up the System
21