HP 9000 Superdome SX2000 HP Installation Guide, HP Integrity Superdome/sx2000 - Page 36
Removing the EMI Panels, Power Supply Indicator LED
View all HP 9000 Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
11. Check that the indicator LED on each power supply is lit. See Figure 31. Figure 31 Power Supply Indicator LED Removing the EMI Panels Remove the front and back electromagnetic interference (EMI) panels to access ports and to visually check whether components are in place and the LEDs are properly illuminated when power is applied to the system. To remove the front and back EMI panels, follow these steps: 36 Installing the System
11.
Check that the indicator LED on each power supply is lit. See
Figure 31
.
Figure 31 Power Supply Indicator LED
Removing the EMI Panels
Remove the front and back electromagnetic interference (EMI) panels to access ports and to visually
check whether components are in place and the LEDs are properly illuminated when power is
applied to the system.
To remove the front and back EMI panels, follow these steps:
36
Installing the System