HP 9000 Superdome SX2000 HP Installation Guide, HP Integrity Superdome/sx2000 - Page 53
HP Integrity Superdome/sx2000 EFI Boot Manager, Enter, EFI Shell Prompt
View all HP 9000 Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Figure 48 HP Integrity Superdome/sx2000 EFI Boot Manager Use the up and down arrow keys on the keyboard to highlight EFI Shell (Built-in) and press Enter. Do this for all partitions. After you start the EFI Shell, the console window displays the EFI shell prompt (Figure 49). Figure 49 EFI Shell Prompt NOTE: If autoboot is enabled for an nPartition, you must interrupt it to stop the boot process at the EFI firmware console. The VFP indicates that each partition is at system firmware console (Figure 50). Booting and Verifying the System 53
Figure 48 HP Integrity Superdome/sx2000 EFI Boot Manager
Use the up and down arrow keys on the keyboard to highlight
EFI Shell (Built-in)
and
press
Enter
. Do this for all partitions.
After you start the EFI Shell, the console window displays the EFI shell prompt (
Figure 49
).
Figure 49 EFI Shell Prompt
NOTE:
If autoboot is enabled for an nPartition, you must interrupt it to stop the boot process at
the EFI firmware console.
The VFP indicates that each partition is at system firmware console (
Figure 50
).
Booting and Verifying the System
53