HP BladeSystem bc2800 Service Reference Guide: HP BladeSystem PC Blade Enclosu - Page 19
Removing a Blade PC, CAUTION
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Removing a Blade PC 1. Power down the blade PC (Powering Down a Blade PC on page 12). 2. Press the release latch (1). 3. Pull down the ejector lever (2). 4. Remove the blade PC from the enclosure. Figure 3-6 Removing a blade PC To install a new blade PC, reverse the removal procedures. For more information, see the Service Reference Guide at http://bizsupport.austin.hp.com/bc/docs/ support/SupportManual/c01091959/c01091959.pdf. CAUTION: Integrated Administrator security settings are assigned to HP Blade PC bays, not to HP Blade PCs. If HP Blade PCs change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP Integrated Administrator User Guide for more information on security settings. Preparing for Non-Hot-Plug Procedures 13