HP BladeSystem bc2800 Service Reference Guide: HP BladeSystem PC Blade Enclosu - Page 50
POST Error Messages
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6 POST Error Messages NOTE: Refer to the Service Reference Guide: HP BladeSystem PC bc2200/bc2800 for other error messages such as BMC blink codes. Use POST error messages to assist in troubleshooting and performing basic diagnostic functions. POST error messages represent what the BIOS reports. The following table lists the numeric codes and text messages specific to blade PCs. For information about troubleshooting, see Troubleshooting on page 49. NOTE: Attempt the recommended actions in the order in which they are listed. If the first does not resolve the issue, try the next on the list. POST Error Messages Code/Message 101-Option ROM Checksum Error Health LED Red 102/103-System Board Failure Red 162-System Options Not Set Amber 163-Time & Date Not Set 164-Memory Size Error Amber Amber Possible Cause Recommended Action Blade system board has failed. ● Clear CMOS. ● Flash the system ROM. ● Blade PC system ● board has failed. ● CMOS was cleared or ● the blade PC's battery has failed. ● Replace the blade PC. Clear CMOS Replace the blade PC. Reset the system time and date in Computer Setup (F10). Replace the blade PC's RTC battery. CMOS was cleared Reset the system time and date in Computer Setup (F10). Memory configuration ● Ensure the SODIMM(s) are properly is incorrect. installed. ● Verify that the proper type of SODIMM is installed. ● Reseat the SODIMM(s). ● Replace the SODIMM(s). ● Replace the blade PC. 44 Chapter 6 POST Error Messages