HP BladeSystem bc2800 Service Reference Guide: HP BladeSystem PC Blade Enclosu - Page 33
Hardware Diagnostic Tools, Diagnostic Adapter
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Table 4-1 Diagnostic tools (continued) HP Systems Insight Manager (SIM) Systems Insight Manager is a client/server application used to remotely manage HP hardware in a network environment. SIM reports HP Blade PC and HP Blade PC Enclosure hardware fault conditions (both failure and prefailure) and collects data for reporting and graphing. For more information on viewing and printing the event list, refer to the Management CD or the SIM User Guide. ROM-Based Setup Utility (RBSU) RBSU configures the hardware installed in or connected to the HP Blade PC. Specifically, it can: ● Store configuration information in nonvolatile memory. ● Manage memory installation, processor upgrades, network interface cards, and mass storage devices. ● Assist in installing an operating system. ● Configure connectors and IRQs, if required. Attach a keyboard to the HP Blade PC using the diagnostic adapter. Run RBSU by pressing the F10 key during POST. BMCFlash Utility Update utility for the Blade Management Controller (BMC) firmware.. Flash the BMC on BC2x00 blades only. Hardware Diagnostic Tools The HP BladeSystem PC Blade system offers the following HP Blade PC and HP PC Blade Enclosure hardware diagnostic tools. Diagnostic Adapter Use the diagnostic adapter(s) to attach peripheral devices to any individual HP Blade PC for local HP Blade PC diagnosis and management. See Connectors, Switches, and LEDs on page 30 for the location of diagnostic adapter connectors. NOTE: You can hot-add peripheral devices using the diagnostic adapter if the devices support hotplug capability. 1. Power down the HP Blade PC (Powering Down a Blade PC on page 12). 2. Plug the diagnostic adapter into the diagnostic connector on the HP Blade PC (1). Hardware Diagnostic Tools 27