HP Carrier-grade cc3300 UserÆs Guide and Technical UserÆs Gu - Page 71
Replacement Disks, Installing a Second Disk Drive in the Server Chassis, Disk Types
View all HP Carrier-grade cc3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Replacement Disks The SCSI address jumpers need to be removed from the failed disk and installed on the replacement disk. Set the SCSI address on the replacement disk to match the failed disk's SCSI address. Installing a Second Disk Drive in the Server Chassis Check the SCSI address setting on the disk drive that is already installed. The SCSI address will be 5 or 6. Set the SCSI address on the second disk so it doesn't match the SCSI address of the currently installed disk drive. Failure to set the SCSI address properly could result in a SCSI address conflict. Disk Types Different hard drives are used in the server. Please refer to the following information to determine the disk type being replaced or installed. Part Number A6942-69001/A6943-69001 Product Number A6942A/A6943A Jumper Settings cc2300 Carrier Grade Server Product Guide 71