HP Color Laser MFP 170 User Guide - Page 174

Solving other problems, Printing problems

Page 174 highlights

Solving other problems Printing problems Condition The machine does not print. Possible cause Suggested solutions The machine is not receiving power. Connect the machine to the electricity supply first. If the machine has a on the control, press it. (Power) button The machine is not selected as the default machine. Select your machine as your default machine in Windows. Check the machine for the following: • The cover is not closed. Close the cover. • Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 159). • No paper is loaded. Load paper (see "Loading paper in the tray" on page 41). • The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 143). • Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 143). If a system error occurs, contact your service representative. The connection cable between the computer and the machine is not connected properly. Disconnect the machine cable and reconnect it (see "Rear view" on page 23). The connection cable between the computer and the machine is defective. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different machine cable. The port setting is incorrect. Check the Windows printer settings to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one. Solving other problems | 174

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209

Solving other problems |
174
Solving other problems
Printing problems
Condition
Possible cause
Suggested solutions
The machine
does not print.
The machine is not
receiving power.
Connect the machine to the electricity supply
first. If the machine has a
(
Power
) button
on the control, press it.
The machine is not
selected as the default
machine.
Select your machine as your default machine
in Windows.
Check the machine for the following:
The cover is not closed. Close the cover.
Paper is jammed. Clear the paper jam (see "Clearing paper jams" on
page 159).
No paper is loaded. Load paper (see "Loading paper in the tray" on page
41).
The toner cartridge is not installed. Install the toner cartridge (see
"Replacing the toner cartridge" on page 143).
Make sure the protect cover and sheets are removed from the toner
cartridge (see "Replacing the toner cartridge" on page 143).
If a system error occurs, contact your service representative.
The connection cable
between the computer
and the machine is not
connected properly.
Disconnect the machine cable and reconnect
it (see "Rear view" on page 23).
The connection cable
between the computer
and the machine is
defective.
If possible, attach the cable to another
computer that is working properly and print a
job. You can also try using a different
machine cable.
The port setting is
incorrect.
Check the Windows printer settings to make
sure that the print job is sent to the correct
port. If the computer has more than one port,
make sure that the machine is attached to the
correct one.