HP Color Laser MFP 170 User Guide - Page 62
Using a network cable, Access point without a USB cable
View all HP Color Laser MFP 170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Access point without a USB cable Items to prepare • Wi-Fi-enabled PC running Windows 7 or higher and an access point (router) • You need to download software packages from the HP website to install the printer software. For HP's all-inclusive help for the printer, go to www.hp.com/support/colorlaser170MFP. • A machine installed with a wireless network interface While setting the wireless network, the machine uses PC's wireless LAN. You might not be able to connect to the Internet. 1 Turn on your computer, access point, and machine. 2 Download printer driver software from the HP website (www.hp.com/support/colorlaser170MFP). 3 Unzip the driver package and run the driver installer. 4 Review and accept the installation agreements in the installation window. Then, click Next. 5 Select Wireless on the Printer Connection Type screen. Then, click Next. 6 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next. If your printer is already connected on the network, select No, my printer is already connected to my network. 7 Select Using a direct wireless connection on the Select the Wireless Setup Method screen. Then, click Next. 8 When the wireless network set up is completed, click Next. 9 Follow the instructions in the installation window. Using a network cable See your network administrator, or the person that set up your wireless network, for information about your network configuration. Wireless network setup | 62