HP Color Laser MFP 170 User Guide - Page 48
Setting the paper size and type, Preprinted paper
View all HP Color Laser MFP 170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Preprinted paper When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed. • Must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine's fusing temperature for 0.1 second (about 170°C (338°F)). • Preprinted paper ink must be non-flammable and should not adversely affect machine rollers. • Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. Setting the paper size and type After loading paper in the paper tray, set the paper size and type using the control panel buttons. To change the paper setting set in the machine, set the paper type from the Printing Preferences window > Paper tab > Paper Type (see "Opening printing preferences" on page 76). • It may be necessary to press OK to navigate to lower-level menus for some models. • The paper setting in the machine and driver should match to print without a paper mismatch error. You change the paper setting set in the machine from HP Embedded Web Server. - If your machine is connected to the network, you can set the machine's setting from HP Embedded Web Server > Settings tab > Machine Settings (see "Using HP Embedded Web Server" on page 66). 1 Select (Menu) button on the control panel. 2 Press System Setup > Paper Setup > Paper Size or Paper Type. 3 Select the tray and the option you want. 4 Press OK to save the selection. Media and tray | 48