HP Color Laser MFP 170 User Guide - Page 35
Machine’s basic settings
![]() |
View all HP Color Laser MFP 170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Machine's basic settings You change the machine's setting set in the machine from HP Embedded Web Server. If your machine is connected to the network, you can set the machine's setting from HP Embedded Web Server > Settings tab > Machine Settings (see "Using HP Embedded Web Server" on page 66). Machine's default settings After installation is complete, you may want to set the machine's default settings. To change the machine's default settings, follow these steps: It may be necessary to press OK to navigate to lower-level menus for some models. 1 Select (Menu) button on the control panel. 2 Press System Setup > Machine Setup. 3 Select the option you want, then press OK. 4 Select the sub option you want, then press OK. 5 Press OK to save the selection. 6 Press (Cancel) to return to ready mode. Machine's basic settings | 35
![](/manual_guide/products/hewlettpackard-color-laser-mfp-170-user-guide-3c18644/35.png)