HP Deskjet D2600 User Guide - Page 36
After setting up the product, it does not print, Solution, Cause - install
View all HP Deskjet D2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Solve a problem Chapter 5 After setting up the product, it does not print Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Press the On button to turn on the product • Solution 2: Set your product as the default printer • Solution 3: Check the connection between the product and computer • Solution 4: Check that the cartridges are installed properly and have ink • Solution 5: Load paper in the input tray Solution 1: Press the On button to turn on the product Solution: Look at the display on the product. If the display is blank and the On button is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product. Cause: The product might not have been turned on. If this did not solve the issue, try the next solution. Solution 2: Set your product as the default printer Solution: Use the system tools on your computer to change your product to be the default printer. Cause: You sent the print job to the default printer, but this product was not the default printer. If this did not solve the issue, try the next solution. Solution 3: Check the connection between the product and computer Solution: Check the connection between the product and computer. Cause: The product and computer were not communicating with each other. If this did not solve the issue, try the next solution. Solution 4: Check that the cartridges are installed properly and have ink Solution: Check that the cartridges are installed properly and have ink. Cause: There might have been a problem with one or more of the cartridges. If this did not solve the issue, try the next solution. 34 Solve a problem