HP ENVY 12-g000 Maintenance and Service Guide - Page 45
Mylar shield (WWAN models only), IMPORTANT
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Mylar shield (WWAN models only) Description Mylar shielding foil kit (for use only in models with a WWAN module) Spare part number L14793-001 Before removing the Mylar shield, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). Remove the Mylar shield: ▲ Peel the Mylar shield off the tablet (1), while holding down the M.2 solid-state drive cover (2). IMPORTANT: Be sure to hold down the M.2 solid-state drive cover, or it may also be disengaged with the Mylar shield, which can result in disconnection of one of the antenna cables from the WLAN module. Reverse this procedure to install the Mylar shield. Component replacement procedures 37
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/45.png)