HP ENVY 12-g000 Maintenance and Service Guide - Page 48
Battery, Remove the Phillips PM2.0×2.0 screw
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Battery Description 3-cell, 49-WHr, 4.365-AHr, Li-ion battery ( (includes Mylar screw/POGO cover, bottom thermal Mylar, side thermal Mylar, and thermal grease)) Battery connector bracket Spare part number 924961-856 L14782-001 Before removing the battery, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). 5. Remove the Mylar shield (see Mylar shield (WWAN models only) on page 37). Remove the battery: 1. Remove the remaining Phillips M 2.0×2.0 screw (1) from the bracket on top of the battery connector. 2. Remove the bracket from the tablet (2), and then disconnect the battery cable from the system board (3). 3. Remove the Phillips PM2.0×2.0 screw (1) that secures each USB Type-C port bracket to the tablet, and the lift the brackets from the tablet (2). 40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/48.png)