HP ENVY 12-g000 Maintenance and Service Guide - Page 78
WWAN antennas, Peel the right
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
WWAN antennas Description WWAN antennas (includes antennas and cables, Mylar screw/POGO cover, thermal shield bottom Mylar, thermal shield side Mylar (2), and thermal grease) Spare part number L14789-001 Before removing the WWAN antennas, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32), and then remove the following components: a. Mylar shield (see Mylar shield (WWAN models only) on page 37) b. Battery (see Battery on page 40) c. Thermal solution (see Thermal solution on page 38) d. Solid-state drive (see Solid-state drive on page 42) e. WWAN module (if applicable) (see WWAN module (select models only) on page 44) f. System board (see System board on page 61) g. WLAN antennas (see WLAN antennas on page 65) h. Speakers (see Speakers on page 68) Remove the WWAN antennas from the speakers: ▲ Peel the right (1) and left (2) WWAN antennas off the speakers. 70 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/78.png)