HP ENVY 12-g000 Maintenance and Service Guide - Page 63
Left USB board
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Left USB board Description Left USB board (includes rubber, Mylar screw/POGO cover, bottom thermal Mylar, side thermal Mylar, and thermal grease) Left USB board cable (includes Mylar screw/POGO cover, bottom thermal Mylar, side thermal Mylar, and thermal grease) Left USB board bracket (includes Mylar screw/POGO cover) Spare part number L14764-001 L14766-001 L14780-001 Before removing the left USB board, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). 5. Remove the Mylar shield (see Mylar shield (WWAN models only) on page 37). 6. Disconnect the battery (see Battery on page 40). Remove the left USB board: 1. Disconnect the cable from the board (1). 2. Remove the Phillips M2.0×2.0 screw (2) that secures the board to the tablet. Component replacement procedures 55
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/63.png)