HP ENVY 12-g000 Maintenance and Service Guide - Page 59
Volume button board and cable
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Volume button board and cable Description Volume button board (includes Mylar screw/POGO cover) Volume button board bracket (includes Mylar screw/POGO cover) Spare part number L14760-001 L14761-001 Before removing the volume button board, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). 5. Remove the Mylar shield (see Mylar shield (WWAN models only) on page 37). 6. Disconnect the battery cable from the system board (see Battery on page 40). Remove the volume button board: 1. Release the ZIF connector (1) to which the volume button board cable is connected, and then disconnect the volume button board cable from the system board (2). 2. Remove the Phillips PM2.0×2.0 screw (3) that secures the volume button board to the tablet. 3. Remove the volume button board (4). Reverse this procedure to install the volume button board. Component replacement procedures 51