HP ENVY 12-g000 Maintenance and Service Guide - Page 57
Disconnect the LED board cable from the system board, Remove the rear-facing camera
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1. Release the ZIF connector (1) to which the front-facing webcam cable is connected, and then disconnect the front-facing camera cable from the system board. 2. Detach the front-facing camera (2) from the tablet. (The front-facing camera is attached to the tablet with double-sided adhesive.) 3. Remove the front-facing camera (3). Remove the rear-facing camera: 1. Disconnect the LED board cable from the system board (1), and then remove it from on top of the rear- facing camera (2). NOTE: The cable remains connected to the tablet. Component replacement procedures 49
1.
Release the ZIF connector
(1)
to which the front-facing webcam cable is connected, and then disconnect
the front-facing camera cable from the system board.
2.
Detach the front-facing camera
(2)
from the tablet. (The front-facing camera is attached to the tablet
with double-sided adhesive.)
3.
Remove the front-facing camera
(3)
.
Remove the rear-facing camera:
1.
Disconnect the LED board cable from the system board
(1)
, and then remove it from on top of the rear-
facing camera
(2)
.
NOTE:
The cable remains connected to the tablet.
Component replacement procedures
49