HP ENVY 12-g000 Maintenance and Service Guide - Page 55
Cameras, Remove the infrared camera
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Cameras Description Infrared camera (include Mylar screw/POGO cover) Front-facing camera (include Mylar screw/POGO cover) Rear-facing camera (include Mylar screw/POGO cover) Spare part number L14772-001 L14773-001 L14774-001 Before removing the cameras, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). 5. Remove the Mylar shield (see Mylar shield (WWAN models only) on page 37). 6. Disconnect the battery cable from the system board (see Battery on page 40). Remove the infrared camera: 1. Use the following image to identify the cameras: (1): Infrared camera (2): Front-facing camera (3): Rear-facing camera Component replacement procedures 47