HP ENVY 12-g000 Maintenance and Service Guide - Page 58
Remove the rear-facing camera, Reverse this procedure to install the camera.
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Release the ZIF connector (1) to which the rear-facing camera cable is connected, and then disconnect the rear-facing camera cable from the system board. 3. Detach the rear-facing camera (2) from the tablet. (The rear-facing camera is attached to the tablet with double-sided adhesive.) 4. Remove the rear-facing camera (3). Reverse this procedure to install the camera. 50 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/58.png)
2.
Release the ZIF connector
(1)
to which the rear-facing camera cable is connected, and then disconnect
the rear-facing camera cable from the system board.
3.
Detach the rear-facing camera
(2)
from the tablet. (The rear-facing camera is attached to the tablet with
double-sided adhesive.)
4.
Remove the rear-facing camera
(3)
.
Reverse this procedure to install the camera.
50
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts